technical data sheet technical data sheet 1 low loss tnc male to tnc male test cable using 83% vop pe-p300ll coax operating to 18 ghz the pe330 high performance test cables 0.3 inch diameter and 83% phase velocity offer very low loss performance up to 18 ghz. the durable stainless steel connectors and fep jacket provide a cost effective design ideal for test environments where a rugged cable assembly is required. the series is offered with type n, tnc, and sma connectors all rated to 18 ghz. a heavy duty boot provides improved strain relief and adds to the durability of the cable assemblies. these cable assemblies are built using a double shielded fexible cable, providing excellent shielding effectiveness of greater than 95 db. all pe330 cable assemblies are 100% continuity, hi-pot, and rf tested to published specifcations. custom lengths are built to order and shipped same day. ? 83% velocity of propagation ? shielding effectiveness > 95 db ? maximum vswr is < 1.35:1 to 18 ghz ? minimum bend radius of 1.5 inches ? operating temperature range of -55 to +125 c ? rohs and reach compliant ? same day shipment of custom lengths ? 100% continuity, hi-pot, and rf tested confguration connector 1 tnc male connector 1 specifcation mil-std-348, figure 313-3 connector 2 tnc male connector 2 specifcation mil-std-348, figure 313-3 cable type pe-p300ll electrical specifcations frequency range, ghz dc to 18 impedance, ohms 50 maximum vswr 1.35:1 velocity of propagation, % 83 rf shielding, db 95 typical performance by frequency frequency 1 frequency, mhz 400 insertion loss 0.03 db/ft [0.1 db/m ] power handling, kwatts 2.9 frequency 2 frequency, mhz 1000 insertion loss 0.05 db/ft [0.16 db/m ] power handling, kwatts 1.8 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs PE334-100CM PE334-100CM rev 1.0 PE334-100CM tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs
technical data sheet technical data sheet 2 frequency 3 frequency, ghz 2 insertion loss 0.07 db/ft [0.23 db/m ] power handling, kwatts 1.2 frequency 4 frequency, ghz 3 insertion loss 0.08 db/ft [0.26 db/m ] power handling, kwatts 1.05 frequency 5 frequency, ghz 5 insertion loss 0.1 1 db/ft [0.36 db/m ] power handling, watts 850 frequency 6 frequency, ghz 10 insertion loss 0.16 db/ft [0.52 db/m ] power handling, watts 600 frequency 7 frequency, ghz 18 insertion loss 0.22 db/ft [0.72 db/m ] power handling, watts 400 electrical specifcation notes: power handling values are calculated based on cable properties. power handling will vary based on the actual vswr of the cable assembly. mechanical specifcations cable assembly cable type pe-p300ll temperature temperature operating range, deg c -55 to +125 size length, in [cm] 39.37 [100] diameter, in [mm] 0.625 [15.88] . weight, lbs [g] 0.1 [45.36] cable color green repeated minimum bend radius, in [mm] 1.5 [38.1] PE334-100CM rev 1.0 PE334-100CM click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs PE334-100CM tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs
technical data sheet technical data sheet 3 cable cable inner conductor copper , silver no of shields 2 cable outer conductor copper , silver dielectric type ptfe jacket material fep jacket diameter, in [mm] 0.3 [7.62] connector 1 type tnc male confguration straight inner conductor material and plating beryllium copper , gold inner conductor plating specifcation astm-b488 50 in. outer conductor material and plating passivated stainless steel outer conductor plating specifcation sae-ams-2701 coupling nut material and plating passivated stainless steel coupling nut plating specifcation sae-ams-2701 hex size, inch 9/16 torque, in-lbs [nm] 14 [1.58] body material and plating passivated stainless steel body plating specifcation sae-ams-2701 dielectric type ptfe connector 2 type tnc male confguration straight inner conductor material and plating beryllium copper , gold inner conductor plating specifcation astm-b488 50 in. outer conductor material and plating passivated stainless steel outer conductor plating specifcation sae-ams-2701 coupling nut material and plating passivated stainless steel coupling nut plating specifcation sae-ams-2701 hex size, inch 9/16 torque, in-lbs [nm] 14 [1.58] body material and plating passivated stainless steel body plating specifcation sae-ams-2701 dielectric type ptfe compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es PE334-100CM rev 1.0 PE334-100CM click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs PE334-100CM tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs
technical data sheet technical data sheet 4 plotted and other data notes: v alues at 25 c, sea level tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs from pasternack enterprises has same day shipment for domestic and international orders. our rf , microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs PE334-100CM url: http://www.pasternack.com/tnc-male-tnc-male-pe-p300ll-cable-assembly-PE334-100CM-p.aspx PE334-100CM rev 1.0 PE334-100CM tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs
5 ? 2013 pasternack enterprises all rights reserved PE334-100CM rev 1.0 tnc male to tnc male low loss test cable 100 cm length using pe-p300ll coax, rohs PE334-100CM cad drawing
|
